Create VLAN on All Machines#

To create VLAN interfaces on all Arrow Lake machines, execute the following commands on each machine. This example creates VLANs with IDs 1, 3, and 5, which correspond to the VLAN configuration on the MOXA TSN switch.

Note: Make sure to replace enp1s0 with the actual network interface name associated with the i226 network card.

sudo ip link add link enp1s0 name enp1s0.1 type vlan id 1
sudo ip link set enp1s0.1 type vlan egress-qos-map 0:1
sudo ifconfig enp1s0.1 192.168.127.31 up

sudo ip link add link enp1s0 name enp1s0.3 type vlan id 3
sudo ip link set enp1s0.3 type vlan egress-qos-map 0:3
sudo ifconfig enp1s0.3 192.168.3.31 up

sudo ip link add link enp1s0 name enp1s0.5 type vlan id 5
sudo ip link set enp1s0.5 type vlan egress-qos-map 0:5
sudo ifconfig enp1s0.5 192.168.5.31 up

Assign vlan id on TSN switch#

If you are using MOXA TSN switch, follow the MOXA Switch VLAN configuration guide to assign vlan id on TSN switch.

On this page

This Page