System Requirements - Mission Systems#
Machines#
Four Linux machines, all cabled to the same Moxa Time-Sensitive Networking (TSN) switch and to a lab network:
Machine |
Role |
Switch port |
|---|---|---|
machine-1 |
Dashboard, Scenescape, Deep Learning Streamer (DL Streamer), MQTT broker. Also the machine where you run |
1 |
machine-2 |
Camera 1: test-video stream and inference |
2 |
machine-3 |
Camera 2: test-video stream and inference |
3 |
machine-4 |
Load injector |
4 |
Each machine needs an Intel I225-LM or I226-LM TSN network card (PCI ID 8086:15f2 / 8086:125b).
Machine-1 needs about 8 CPU cores for the full stack and several GB of free disk space for the Docker
images (the DL Streamer image alone is about 5 GB). The camera machines need Docker and enough CPU
for one inference pipeline each.
Network Topology#
Ports 1 to 4 carry VLAN 1 (camera data, priority 1), VLAN 3 (Basler cameras), and VLAN 5 (load, priority 5). The dotted lab network is never shaped.
Software#
Ubuntu 24.04
Docker Engine with Docker Compose V2 on all machines, so that
docker composeworks (not only the legacydocker-compose). For installation instructions, see the installation guide.gitandmakeon machine-1linuxptpand NetworkManager (installed or used by the setup scripts)Passwordless, key-based SSH from machine-1 to machines 2, 3, and 4
Internet or proxy access on machine-1 to pull the Docker images and to download the detection model. The download script (
src/data/download_models.sh) runs automatically inmake up. The model comes from Open Model Zoo (Apache-2.0), andmake upasks you to accept its license on the first download.
Network#
Lab network: SSH, the dashboard in the browser, and control traffic. Not part of the TSN path.
TSN switch: VLAN 1 (
192.168.127.x) camera data, VLAN 5 (192.168.5.x) background load, VLAN 3 (192.168.3.x) Basler cameras.
Hardware#
Component |
Details |
|---|---|
Moxa TSN-G5000 switch |
IEEE 802.1Qbv and IEEE 1588v2/802.1AS support, Telnet management enabled (the dashboard scripts use it). Tested with TSN-G5008-2GTXSFP, firmware 2.1 |
Basler ace GigE cameras (optional) |
Precision Time Protocol (PTP) hardware timestamps, for the Basler test only. Tested with acA1920-40GC |