Release Notes: UAV Ground Station#
Version 2026.3.0#
Release Date: TBD
New:
Remote viewer for UAV Vision Analytics. The dashboard runs on a separate machine, such as a ground-station laptop, and talks to the UAV host only after you enter its IP address and press Connect.
H.264 relay for live video. A MediaMTX sidecar pulls each camera’s H.264 RTSP stream from the UAV host on demand and serves it to the browser over WebRTC (WHEP) without transcoding. Cards recover on their own when a feed drops and comes back.
Camera cards show the detection and VLM devices, the models, the prompt, and the pipeline state for each running pipeline, together with the scene captions published on
uav/caption/<camera>.Host utilization of the UAV host (through its Metrics Manager) and of the ground-station machine.
Multiple UAVs in one session, with a tab per host. Streams are registered under host-qualified names, so two UAVs can use the same camera name.
Live Natural Language Search (
make up-vss, optional): every running camera is indexed live with the Video Search and Summarization (VSS) stack, and the Search Videos popup returns ranked clips with thumbnails, SD and HD playback, and UAV and Camera filters.make up-vss DEVICE=CPU|GPU|NPU|allselects the device of the VSS models.Flight Summary report, built from the MQTT scene captions without VSS or an LLM, with a PDF download.
Architecture popup that shows the services of the UAV host, the ground station, and VSS, the flow of video, captions, indexing and search, and the models on each device.
Simpler setup:
make initcreates.env, detects the host IP from the default route and the GPU and NPU devices, generates the VSS credentials, and asks before downloading the VSS models.make upandmake up-vssmove the published ports to free ones and avoid the ports of the UAV Mission Compute SDK.Optional TLS verification of the UAV host’s certificate (
VIZ_REMOTE_TLS_VERIFY).Documentation and agent skills for deployment, configuration, and the backend routes.
Known issues and limitations:
The dashboard is a viewer for a trusted network: it has no authentication, and it does not verify the UAV host’s self-signed certificate unless
VIZ_REMOTE_TLS_VERIFY=true.It makes read-only requests and never starts or stops pipelines on the UAV host.
Video requires an H.264 RTSP stream from the UAV host. Otherwise the card shows a placeholder.
If the cameras on the UAV host are stopped and started again immediately, a card can stay without video until the pipeline server on the UAV host is restarted (
docker restart uav-va-dlstreamer-pipeline-server). Captions keep working.Search Videos is available only after
make up-vss, and the first start downloads the VSS models into Docker volumes. Footage indexed from UAVs that are no longer connected stays searchable untilmake clean-vss-index.The VSS images use the
2026.3.0-rc1tag.The ground station and the UAV Mission Compute SDK use overlapping ports. Install the SDK before the ground station on the same machine, or set different ports in
.env.