# RealSense — UAV Vision Analytics A RealSense (or any UVC webcam) is a live camera in [`configs/cameras-pymavlink.yaml`](https://github.com/open-edge-platform/federal-and-aerospace-ai-suite/blob/main/uav-vision-analytics/configs/cameras-pymavlink.yaml): the camera has a `device` instead of a `video` file. The full settings are described in [Configure the cameras](./configure-cameras.md#live-cameras-realsense-usb-webcams); this page is the short walk-through. ## Prerequisites See [System Requirements](../../get-started/system-requirements.md) for the full list of software and hardware prerequisites. ## Steps 1. **Find the color node.** List the cameras and check the formats of the nodes: ```bash lsusb v4l2-ctl --list-devices v4l2-ctl -d /dev/video4 --list-formats-ext # the color node offers YUYV or UYVY; depth is Z16, infrared GREY ls -l /dev/v4l/by-id/ # stable names; prefer them over /dev/videoN ``` 2. **Make it visible to the container.** Put the path in `.env` (`make init` fills `CAMERA_DEVICE_1` with the first USB camera; up to `CAMERA_DEVICE_4`) and recreate the container: ```bash CAMERA_DEVICE_1=/dev/v4l/by-id/usb-Intel_R__RealSense_TM__Depth_Camera_435_..._-video-index0 make pymav-up ``` 3. **Enable the camera** in `configs/cameras-pymavlink.yaml` (it ships as `realsense_camera`, disabled), with the same path as `device:`, then check and start: ```bash make check-cameras make start-rtsp # the cameras start when the vehicle is armed ``` Without a vehicle: `docker exec -it uav-va-dlstreamer-pipeline-server python3 /home/pipeline-server/scripts/pipeline_manager.py --start-now`. 4. **View the stream** at `rtsp://:8555/uav-realsense-camera` (`ffplay`, VLC, or the ground-station dashboard, where the card has a `LIVE` badge). ## Pipelines Live cameras use `uav_camera_` and `uav_camera__`. `configs/config-pymavlink.json` has `uav_camera_npu` and `uav_camera_npu_gpu`; for a CPU or GPU camera, copy the pipeline you need from [`configs/config-pymavlink-realsense.json`](https://github.com/open-edge-platform/federal-and-aerospace-ai-suite/blob/main/uav-vision-analytics/configs/config-pymavlink-realsense.json) (all nine) into it and recreate the container. `make check-cameras` says which pipeline is missing. ## UAV Mission Compute SDK stack The SDK stack streams its cameras over RTSP and uses `configs/cameras-uavsdk.yaml`; see [Get started with the UAV Mission Compute SDK](../../get-started/get-started-uavsdk.md).