# Manage Live Cameras The **Live cameras** page lists the live RTSP streams registered in VSS (`/manager/streams`). Live search is available only for cameras listed here. ![Live cameras page](../_assets/live-cameras.jpg "Live cameras") ## Add a Camera 1. Click **Add camera**, or select a camera on the **Floorplan** and click **Add live camera here**. The **Add live camera** dialog opens. 2. Fill in: - **RTSP URL**, for example `rtsp://10.0.0.12:8554/lobby` (must be reachable from the VSS host); - **Camera**: the floorplan camera associated with this stream. The list is grouped by zone; cameras that already have a live stream are disabled. The camera name (for example `P_Lev_4_Main_Entry_ip_54`) becomes the stream's name and its only VSS tag; the camera's zone becomes the stream description. A camera that has recorded footage from an earlier stream can be reused; the new stream keeps the same tag, so old and new footage are drawn at the same place; - **Index every N frames** and **Object detection** to tune indexing. 3. Click **Add camera**. VSS starts ingesting the stream and the camera appears on the plan. Allow a minute or two before footage from the new camera appears in search results. ![Add live camera dialog](../_assets/add-camera.jpg "Add live camera") VSS tags determine which cameras are included in a search. Each live camera has exactly one tag, unique to its floorplan camera. **Edit** changes only the indexing settings. To move a stream to another floorplan camera, remove it and add it again at the new floorplan camera. Confirm the removal when prompted. ## Edit, Pause, or Remove - Use the pause or resume button on a camera card to pause the ingestion or resume it. - Open the card's actions menu to **Edit** or **Remove** the camera. - Use the filter box to find cameras by camera name, zone, or IP, and select **Refresh** to reload the list. If your network uses a proxy, add the RTSP hosts to `no_proxy` on the VSS host.