# How to use UAV Vision Analytics These guides cover what the application can do and how to operate it as shipped: viewing streams, running the ground station, deployment modes, testing, and troubleshooting. To change what the application does — cameras, models, pipelines, overlay, search tuning — see [How to Customize](./how-to-customize.md). ## Ground Station - [QGroundControl](./how-to-guides/qgroundcontrol.md) — Configure QGroundControl to receive the UAV Vision Analytics video stream - [Multi-UAV Operations in the Ground Station](./how-to-guides/multi-uav-ground-station.md) — Connect multiple UAVs, per-UAV tabs, and the per-host Flight Summary - [Search Live Video with VSS](./how-to-guides/vss-live-search.md) — How live indexing and UAV/camera-scoped search work in the ground station ## Deployment and Operations - [Switch Between Pymavlink and UAV Mission Compute SDK Deployment Modes](./how-to-guides/switch-deployment-mode.md) — Architecture differences and the `HOST_IP` binding requirement - [Enable NPU Inference](./how-to-guides/enable-npu-inference.md) — NPU enablement end-to-end, including common failure modes - [Test Against a Simulated, Continuously-Armed Mission](./how-to-guides/simulate-continuous-mission.md) — Keep PX4 SITL armed during interactive pipeline testing - [View and Interpret Detection Logs (JSONL)](./how-to-guides/view-detection-logs.md) — Tail, filter, and correlate the per-pipeline detection metadata ## Reference - [Makefile Reference](./how-to-guides/makefile.md) — Shorthand targets for model setup, stack management, and pipeline control - [Troubleshooting](./how-to-guides/troubleshooting.md) — Common issues and fixes for deployment, inference, and streaming problems :::{toctree} :hidden: QGroundControl <./how-to-guides/qgroundcontrol.md> Multi-UAV Operations in the Ground Station <./how-to-guides/multi-uav-ground-station.md> Search Live Video with VSS <./how-to-guides/vss-live-search.md> Switch Deployment Modes <./how-to-guides/switch-deployment-mode.md> Enable NPU Inference <./how-to-guides/enable-npu-inference.md> Simulate a Continuous Mission <./how-to-guides/simulate-continuous-mission.md> View Detection Logs <./how-to-guides/view-detection-logs.md> Makefile Reference <./how-to-guides/makefile.md> Troubleshooting <./how-to-guides/troubleshooting.md> :::