# Handheld Multi-Modal Application Deployment This guide provides instructions on how to deploy the Handheld Multi-Modal application on a local machine. ## Prerequisites | Requirement | Notes | |-------------|-------| | Intel® Core™ Ultra processor with integrated GPU and NPU | Drivers must expose `/dev/dri/renderD128` (GPU) and `/dev/accel/accel0` (NPU). See [Install OEP SDKs](install-oep-sdks.md) to verify the accelerators. | | Docker Engine and Docker Compose 2.24.4 or later | [Install guide](https://docs.docker.com/engine/install/). Use `docker compose` (space), not `docker-compose` (hyphen). The user must be able to run `docker` without `sudo`. | | GNU Make, Bash, Python 3.11 or later, curl, OpenSSL | Standard Linux utilities used by the Makefile. | | Disk space and Internet access for the first start | The first start downloads several GB of container images and models. Later starts run offline. | The Makefile detects the GPU, NPU, and asset-directory group IDs separately; they do not need to match. ## (Optional) Configuring the Proxy > [!NOTE] > If not using proxy servers, skip to [Deploying the Application](#deploying-the-application). Depending on the system's network configuration, you may need an additional proxy configuration. Ensure that `/etc/environment` contains proxy variables; replace `proxy-example:123` with a valid proxy for the local environment. `localhost` and `127.0.0.1` must be in `no_proxy`: the pre-flight check fails if requests to `127.0.0.1` would go through the proxy. ```bash sudo tee -a /etc/environment > /dev/null < /dev/null <